Factory Supply Ac Capacitor For Welding Equipment - New AC filter capacitor for modern converter and UPS application – CRE
Factory Supply Ac Capacitor For Welding Equipment - New AC filter capacitor for modern converter and UPS application – CRE Detail:
Technical data
| Operating temperature range | Max.Operating temperature.,Top,max: +85℃Upper category temperature:+70℃Lower category temperature:-40℃ | ||
| capacitance range | Single phase | 20UF~500μF | |
| three-phase |
3×40UF~3×200μF |
||
| Un/ Rated voltage Un |
330V.AC/50Hz~1140V.AC/50Hz |
||
| Cap.tol |
±5%(J) ; |
||
| Withstand voltage |
Vt-t |
2.15Un /10S |
|
|
Vt-c |
1000+2×Un V.AC 60S(min3000V.AC) |
||
| Over Voltage |
1.1Un(30% of on-load-dur.) |
||
|
1.15Un(30min/day) |
|||
|
1.2Un(5min/day) |
|||
|
1.3Un(1min/day) |
|||
|
1.5Un(100ms every time,1000times during the lifetime) |
|||
| Dissipation factor |
tgδ≤0.002 f=100Hz |
||
| tgδ0≤0.0002 | |||
| Insulation resistance | RS*C≥10000S(at20℃ 100V.DC) | ||
| Flame retardation |
UL94V-0 |
||
| Maximum aititude |
2000m |
||
| When the altitude is above 2000m to below 5000m, it is necessary to consider the use of reduced amount.(for each increase of 1000m, the voltage and current will be reduced by 10%)
|
|||
| Life expectancy |
100000h(Un; Θhotspot≤55 °C) |
||
| Reference standard |
IEC61071;IEC 60831; |
||
Feature
1. Aluminum round housing package, Sealed with resin;
2. Copper nut / screw leads, insulated plastic cover positioning,easy installation ;
3. Large capacity, small size;
4. Resistance to high voltage, with self-healing;
5. High ripple current, high dv / dt withstand capability.
Application
1. Widely used in power electronic equipment used for the AC filter.
2. In the high-power UPS, switching power supply, inverter and other equipment for the AC filter, harmonics and improve power factor control.
Typical circuit

Life expectancy

Outline drawing of single phase
|
ΦD(mm) |
P(mm) |
H1(mm) |
S |
F |
M |
|
76 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
86 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
96 |
45 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
116 |
50 |
22 |
M12×16 |
M6×10 |
M8×20 |
|
136 |
50 |
30 |
M16×25 |
M6×10 |
M8×20 |


Outline drawing of three- phase
|
ΦD(mm) |
H1(mm) |
S |
F |
M |
D1 |
P |
|
116 |
40 |
M12×16 |
M6×10 |
M8×20 |
50 |
43.5 |
|
136 |
30 |
M16×25 |
M6×10 |
M8×20 |
60 |
52 |

| Voltage | Un=330V.AC Us=1200V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 80 | 76 | 80 | 40 | 80 | 6.4 | 19.2 | 30 | 4 | 4.2 | 32 | 0.5 |
| 120 | 86 | 80 | 40 | 70 | 8.4 | 25.2 | 40 | 2.8 | 3.3 | 32 | 0.7 |
| 150 | 96 | 80 | 45 | 70 | 10.5 | 31.5 | 50 | 3.5 | 1.7 | 45 | 0.75 |
| 170 | 76 | 130 | 50 | 60 | 10.2 | 30.6 | 60 | 3.2 | 1.3 | 32 | 0.75 |
| 230 | 86 | 130 | 50 | 60 | 13.8 | 41.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
| 300 | 96 | 130 | 50 | 50 | 15.0 | 45.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
| 420 | 116 | 130 | 60 | 50 | 21.0 | 63.0 | 80 | 1.9 | 1.2 | 50 | 1.6 |
| Voltage | Un=450V.AC Us=1520V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 50 | 76 | 80 | 40 | 90 | 4.5 | 13.5 | 30 | 4 | 4.2 | 32 | 0.5 |
| 65 | 86 | 80 | 50 | 80 | 5.2 | 15.6 | 40 | 2.8 | 3.3 | 32 | 0.7 |
| 80 | 96 | 80 | 45 | 80 | 6.4 | 19.2 | 50 | 3.5 | 1.7 | 45 | 0.75 |
| 100 | 76 | 130 | 50 | 70 | 7.0 | 21.0 | 60 | 3.2 | 1.3 | 32 | 0.75 |
| 130 | 86 | 130 | 45 | 60 | 7.8 | 23.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
| 160 | 96 | 130 | 50 | 50 | 8.0 | 24.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
| 250 | 116 | 130 | 60 | 50 | 12.5 | 37.5 | 80 | 1.9 | 1.2 | 50 | 1.6 |
| Voltage | Un=690V.AC Us=2100V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 40 | 76 | 130 | 50 | 100 | 4.0 | 12.0 | 30 | 2.8 | 6.0 | 32 | 0.75 |
| 50 | 76 | 150 | 45 | 90 | 4.5 | 13.5 | 35 | 2.4 | 5.1 | 32 | 0.85 |
| 60 | 86 | 130 | 45 | 80 | 4.8 | 14.4 | 40 | 2.2 | 4.3 | 32 | 1.1 |
| 65 | 86 | 150 | 50 | 80 | 5.2 | 15.6 | 45 | 1.8 | 4.1 | 32 | 1.2 |
| 75 | 96 | 130 | 50 | 80 | 6.0 | 18.0 | 50 | 1.5 | 4.0 | 45 | 1.2 |
| 80 | 96 | 150 | 55 | 75 | 6.0 | 18.0 | 60 | 1.2 | 3.5 | 45 | 1.3 |
| 110 | 116 | 130 | 60 | 70 | 7.7 | 23.1 | 65 | 0.8 | 4.4 | 50 | 1.6 |
| 120 | 116 | 150 | 65 | 50 | 6.0 | 18.0 | 75 | 0.6 | 4.4 | 50 | 1.8 |
| Voltage | Un=850V.AC Us=2850V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 25 | 76 | 130 | 50 | 110 | 2.8 | 8.3 | 35 | 1.5 | 8.2 | 32 | 0.75 |
| 30 | 76 | 150 | 60 | 100 | 3.0 | 9.0 | 40 | 1.2 | 7.8 | 32 | 0.85 |
| 32 | 86 | 130 | 45 | 100 | 3.2 | 9.6 | 50 | 1.15 | 5.2 | 32 | 1.1 |
| 45 | 86 | 150 | 50 | 90 | 4.1 | 12.2 | 50 | 1.05 | 5.7 | 32 | 1.2 |
| 40 | 96 | 130 | 50 | 90 | 3.6 | 10.8 | 50 | 1 | 6.0 | 45 | 1.2 |
| 60 | 96 | 150 | 60 | 85 | 5.1 | 15.3 | 60 | 0.9 | 4.6 | 45 | 1.3 |
| 60 | 116 | 130 | 60 | 80 | 4.8 | 14.4 | 65 | 0.85 | 4.2 | 50 | 1.6 |
| 90 | 116 | 150 | 65 | 75 | 6.8 | 20.3 | 75 | 0.8 | 3.3 | 50 | 1.8 |
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A) | ESR(mΩ) | Rth(K/W) | P(mm) | weight(Kg) | |
| Voltage | Un=400V.AC Us=1200V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 110 | 116 | 130 | 100 | 60 | 6.6 | 19.8 | 3×50 | 3×0.78 | 4.5 | 43.5 | 1.6 |
| 3× | 145 | 116 | 180 | 110 | 50 | 7.3 | 21.8 | 3×60 | 3×0.72 | 3.8 | 43.5 | 2.4 |
| 3× | 175 | 116 | 210 | 120 | 50 | 8.8 | 26.3 | 3×75 | 3×0.67 | 3.5 | 43.5 | 2.7 |
| 3× | 200 | 136 | 230 | 125 | 40 | 8.0 | 24.0 | 3×85 | 3×0.6 | 2.1 | 52 | 4.2 |
| Voltage | Un=500V.AC Us=1520V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 100 | 116 | 180 | 100 | 80 | 8.0 | 24.0 | 3×45 | 3×0.78 | 4.5 | 43.5 | 2.6 |
| 3× | 120 | 116 | 230 | 120 | 70 | 8.4 | 25.2 | 3×50 | 3×0.72 | 3.8 | 43.5 | 3 |
| 3× | 125 | 136 | 180 | 110 | 40 | 5.0 | 15.0 | 3×70 | 3×0.67 | 3.5 | 52 | 3.2 |
| 3× | 135 | 136 | 230 | 130 | 50 | 6.8 | 20.3 | 3×80 | 3×0.6 | 2.1 | 52 | 4.2 |
| Voltage | Un=690V.AC Us=2100V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 49 | 116 | 230 | 120 | 70 | 3.4 | 10.3 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
| 3× | 55.7 | 136 | 230 | 130 | 90 | 5.0 | 15.0 | 3×56 | 3×0.4 | 2.1 | 52 | 4.2 |
| Voltage | Un=850V.AC Us=2580V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 41.5 | 116 | 230 | 120 | 80 | 3.0 | 9.0 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
| 3× | 55.7 | 136 | 230 | 130 | 50 | 0.4 | 1.2 | 3×104 | 3×0.45 | 1.8 | 52 | 4.2 |
Product detail pictures:
Related Product Guide:
Dedicated to strict top quality command and considerate purchaser support, our experienced staff customers are always available to discuss your necessities and be certain full client gratification for Factory Supply Ac Capacitor For Welding Equipment - New AC filter capacitor for modern converter and UPS application – CRE , The product will supply to all over the world, such as: Morocco, Thailand, Seychelles, The quality of our merchandise is equal to OEM's quality, because our core parts are the same with OEM supplier. The above items have passed professional certification, and we not only can produce OEM-standard items but we also accept Customized Merchandise order.
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.






