OEM/ODM Factory Low Capacitance Loss Fim Capacitor - High-energy density power capacitors in high power converters – CRE
OEM/ODM Factory Low Capacitance Loss Fim Capacitor - High-energy density power capacitors in high power converters – CRE Detail:
DKMJ-S series
Metalized polypropylene capacitors, dry solution, for DC filters applications. Due to the high energy density, high rated voltage, and high ripple current, they can easily replace the electrolytic capacitors without additional series connections.
Technical data
| Operating temperature range | Max.Operating temperature.,Top,max: + 70℃Upper category temperature: +60℃Lower category temperature: -40℃ | |
| capacitance range |
100μF~20000μF |
|
| Un/ Rated voltage Un |
600V.DC~4000V.DC |
|
| Cap.tol |
±5%(J);±10%(K) |
|
| Withstand voltage |
Vt-t |
1.5Un DC/60S |
|
Vt-c |
1000+2×Un/√2 (V.AC) 60S(min 3000 V.AC) |
|
| Over Voltage |
1.1Un(30% of on-load-dur.) |
|
|
1.15Un(30min/day) |
||
|
1.2Un(5min/day) |
||
|
1.3Un(1min/day) |
||
|
1.5Un(100ms every time,1000times during the lifetime) |
||
| Dissipation factor |
tgδ≤0.003 f=100Hz |
|
|
tgδ0≤0.0002 |
||
| ESL |
<150 nH |
|
| Flame retardation |
UL94V-0 |
|
| Maximum altitude |
2000m |
|
| When the altitude is above 2000m to below 5000m, it is necessary to consider the use of a reduced amount.(for each increase of 1000m, the voltage and current will be reduced by 10%)
|
||
| Life expectancy |
100000h(Un; Θhotspot ≤70 °C ) |
|
| Reference standard |
IEC 61071 ;IEC 61881; |
|
Specification table
| Voltage | Un 800V.DC Us 1200V Ur 200V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 4000 | 340 | 125 | 190 | 5 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
| 8000 | 340 | 125 | 350 | 4 | 32.0 | 180 | 0.72 | 0.6 | 31.2 |
| 6000 | 420 | 125 | 245 | 5 | 30.0 | 150 | 0.95 | 0.7 | 26.4 |
| 10000 | 420 | 125 | 360 | 4 | 40.0 | 200 | 0.72 | 0.5 | 39.2 |
| 12000 | 420 | 235 | 245 | 4 | 48.0 | 250 | 0.9 | 0.3 | 49.6 |
| 20000 | 420 | 235 | 360 | 3 | 60.0 | 300 | 0.6 | 0.3 | 73.6 |
| Voltage | Un 1200V.DC Us 1800V Ur 300V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 2500 | 340 | 125 | 190 | 8 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
| 3300 | 340 | 125 | 245 | 8 | 26.4 | 150 | 0.95 | 0.7 | 22.4 |
| 5000 | 420 | 125 | 300 | 7 | 35.0 | 180 | 0.8 | 0.6 | 32.8 |
| 7500 | 420 | 125 | 430 | 5.5 | 41.3 | 200 | 0.66 | 0.6 | 44.8 |
| 5000 | 340 | 235 | 190 | 8 | 40.0 | 200 | 1.1 | 0.3 | 32.8 |
| 10000 | 340 | 235 | 350 | 6 | 60.0 | 250 | 0.8 | 0.3 | 58.4 |
| 5000 | 420 | 235 | 175 | 8 | 40.0 | 200 | 1 | 0.4 | 36 |
| 7500 | 420 | 235 | 245 | 7 | 52.5 | 250 | 0.9 | 0.3 | 49.6 |
| 10000 | 420 | 235 | 300 | 7 | 70.0 | 250 | 0.8 | 0.3 | 61.6 |
| 15000 | 420 | 235 | 430 | 5 | 75.0 | 300 | 0.6 | 0.3 | 84 |
| Voltage | Un 1500V.DC Us 2250V Ur 450V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 1200 | 340 | 125 | 190 | 10 | 12.0 | 120 | 1.1 | 0.9 | 17.6 |
| 3000 | 340 | 125 | 420 | 8 | 24.0 | 180 | 0.66 | 0.7 | 37.6 |
| 2000 | 420 | 125 | 245 | 10 | 20.0 | 150 | 0.95 | 0.7 | 26.4 |
| 4000 | 420 | 125 | 430 | 8 | 32.0 | 200 | 0.66 | 0.6 | 44.8 |
| 5000 | 340 | 235 | 350 | 8 | 40.0 | 250 | 0.8 | 0.3 | 58.4 |
| 4000 | 420 | 235 | 245 | 10 | 40.0 | 250 | 0.9 | 0.3 | 49.6 |
| 8000 | 420 | 235 | 430 | 8 | 64.0 | 300 | 0.6 | 0.3 | 84 |
| Voltage | Un 2000V.DC Us 3000V Ur 600V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 1000 | 340 | 125 | 245 | 12 | 12.0 | 150 | 0.95 | 0.7 | 22.4 |
| 1500 | 340 | 125 | 350 | 10 | 15.0 | 180 | 0.72 | 0.6 | 31.2 |
| 2000 | 420 | 125 | 360 | 10 | 20.0 | 200 | 0.72 | 0.5 | 39.2 |
| 2400 | 420 | 125 | 430 | 9 | 21.6 | 200 | 0.66 | 0.6 | 44.8 |
| 3200 | 340 | 235 | 350 | 10 | 32.0 | 250 | 0.8 | 0.3 | 46.4 |
| 4000 | 420 | 235 | 360 | 10 | 40.0 | 280 | 0.7 | 0.3 | 58.4 |
| 4800 | 420 | 235 | 430 | 9 | 43.2 | 300 | 0.6 | 0.3 | 67.2 |
| Voltage | Un 2200V.DC Us 3300V Ur 600V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
| 2000 | 420 | 235 | 245 | 12 | 24 | 150 | 0.9 | 0.740740741 | 40 |
| 2750 | 420 | 235 | 300 | 10 | 27.5 | 200 | 0.8 | 0.46875 | 49.6 |
| 3500 | 420 | 235 | 360 | 10 | 35 | 200 | 0.7 | 0.535714286 | 58.4 |
| Voltage | Un 3000V.DC Us 4500V Ur 800V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
| 1050 | 420 | 235 | 245 | 20 | 21 | 150 | 0.9 | 0.740740741 | 40 |
| 1400 | 420 | 235 | 300 | 15 | 21 | 200 | 0.8 | 0.46875 | 49.6 |
| 1800 | 420 | 235 | 360 | 15 | 27 | 200 | 0.7 | 0.535714286 | 58.4 |
| Voltage | Un 4000V.DC Us 6000V Ur 1000V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
| 600 | 420 | 235 | 245 | 20 | 12 | 150 | 0.9 | 0.740740741 | 40 |
| 800 | 420 | 235 | 300 | 20 | 16 | 200 | 0.8 | 0.46875 | 49.6 |
| 1000 | 420 | 235 | 360 | 20 | 20 | 200 | 0.7 | 0.535714286 | 58.4 |
| Voltage | Un 2800V.DC Us 4200V Ur 800V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 2×1000 | 560 | 190 | 310 | 20 | 2×20 | 2×350 | 1 | 0.2 | 60 |
| Voltage | Un 3200V.DC Us 4800V Ur 900V | ||||||||
| Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
| 2×1200 | 340 | 175 | 950 | 15 | 2×18 | 2×200 | 1.0 | 0.5 | 95 |
Product detail pictures:
Related Product Guide:
Our organization sticks to your principle of "Quality may be the life of your organization, and reputation will be the soul of it" for OEM/ODM Factory Low Capacitance Loss Fim Capacitor - High-energy density power capacitors in high power converters – CRE , The product will supply to all over the world, such as: Italy, Madras, Sierra Leone, Our products have won an excellent reputation at each of the related nations. Because the establishment of our firm. we've insisted on our production procedure innovation together with the most recent modern day managing method, attracting a sizable quantity of talents within this industry. We regard the solution good quality as our most vital essence character.
In China, we have many partners, this company is the most satisfying to us, reliable quality and good credit, it is worth appreciation.
Send your message to us:
Write your message here and send it to us





