Online Exporter Dc Power Film Capacitors - High peak current snubber film capacitors design for IGBT power electronics applications – CRE
Online Exporter Dc Power Film Capacitors - High peak current snubber film capacitors design for IGBT power electronics applications – CRE Detail:
Technical data
| Operating temperature range | Max.Operating temperature.,Top,max: +105℃Upper category temperature: +85℃Lower category temperature: -40℃ |
| capacitance range | 0.1μF~5.6μF |
| Rated voltage | 700V.DC~3000V.DC |
| Cap.tol | ±5%(J);±10%(K) |
| Withstand voltage | 1.5Un DC/10S |
| Dissipation factor | tgδ≤0.0005 C≤1μF f=10KHztgδ≤0.001 C≥1μF f=10KHz |
| Insulation resistance |
C≤0.33μF RS≥15000 MΩ (at20℃ 100V.DC 60S) C>0.33μF RS*C≥5000S(at20℃ 100V.DC 60S) |
| Withstand strike current |
see datasheet |
| Flame retardation |
UL94V-0 |
| Life expectancy |
100000h(Un; Θhotspot≤85°C) |
| Reference standard |
IEC61071;GB/T17702; |
Specification table
| Voltage | Un 700V.DC,Urms400Vac;Us1050V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR @100KHz (mΩ) | ESL(nH) | dv/dt (V/μS) | Ipk(A) | Irms @40℃ @100KHz (A) |
| 0.47 | 42.5 | 24.5 | 27.5 | 12 | 25 | 500 | 235 | 8 |
| 0.68 | 42.5 | 24.5 | 27.5 | 10 | 25 | 480 | 326.4 | 10 |
| 1 | 42.5 | 24.5 | 27.5 | 8 | 24 | 450 | 450 | 12 |
| 1.5 | 42.5 | 33.5 | 35.5 | 7 | 25 | 430 | 645 | 5 |
| 2 | 42.5 | 33 | 35.5 | 6 | 24 | 420 | 840 | 15 |
| 2.5 | 42.5 | 33 | 45 | 6 | 23 | 400 | 1000 | 18 |
| 3 | 42.5 | 33 | 45 | 5.5 | 22 | 380 | 1140 | 20 |
| 3 | 57.5 | 30 | 45 | 5 | 26 | 350 | 1050 | 22 |
| 3.5 | 42.5 | 33 | 45 | 5 | 23 | 350 | 1225 | 25 |
| 3.5 | 57.5 | 30 | 45 | 6 | 25 | 300 | 1050 | 22 |
| 4.7 | 57.5 | 35 | 50 | 5 | 28 | 280 | 1316 | 25 |
| 5.6 | 57.5 | 38 | 54 | 4 | 30 | 250 | 1400 | 25 |
| 6 | 57.5 | 38 | 54 | 3.5 | 33 | 230 | 1380 | 28 |
| 6.8 | 57.5 | 42.5 | 56 | 3.2 | 32 | 220 | 1496 | 32 |
| 8 | 57.5 | 42.5 | 56 | 2.8 | 30 | 200 | 1600 | 33 |
| Voltage | Un 1000V.DC,Urms500Vac;Us1500V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 25 | 1000 | 470 | 10 |
| 0.68 | 42.5 | 24.5 | 27.5 | 8 | 25 | 800 | 544 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 24 | 800 | 800 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 24 | 700 | 1050 | 15 |
| 2 | 42.5 | 33 | 45 | 5 | 22 | 700 | 1400 | 20 |
| 2.5 | 57.5 | 30 | 45 | 5 | 30 | 600 | 1500 | 22 |
| 3 | 57.5 | 35 | 50 | 4 | 30 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 35 | 50 | 3.5 | 28 | 550 | 1815 | 25 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 28 | 500 | 1750 | 25 |
| 4 | 57.5 | 38 | 54 | 3.2 | 26 | 500 | 2000 | 28 |
| 4.7 | 57.5 | 42.5 | 56 | 3 | 25 | 420 | 1974 | 30 |
| 5.6 | 57.5 | 42.5 | 56 | 2.8 | 24 | 400 | 2240 | 32 |
| Voltage | Un 1200V.DC,Urms550Vac;Us1800V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 24 | 1200 | 564 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 7 | 23 | 1100 | 748 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 22 | 800 | 800 | 14 |
| 1.5 | 42.5 | 33 | 45 | 5 | 20 | 800 | 1200 | 15 |
| 2 | 57.5 | 30 | 45 | 4 | 30 | 750 | 1500 | 20 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 700 | 1750 | 25 |
| 3 | 57.5 | 35 | 50 | 4 | 27 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 38 | 54 | 4 | 27 | 550 | 1815 | 28 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 25 | 500 | 1750 | 28 |
| 4 | 57.5 | 42.5 | 56 | 3.5 | 25 | 450 | 1800 | 30 |
| 4.7 | 57.5 | 42.5 | 56 | 3.2 | 23 | 420 | 1974 | 32 |
| Voltage | Un 1700V.DC,Urms575Vac;Us2250V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.33 | 42.5 | 24.5 | 27.5 | 12 | 25 | 1300 | 429 | 9 |
| 0.47 | 42.5 | 24.5 | 27.5 | 10 | 24 | 1300 | 611 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 8 | 23 | 1300 | 884 | 12 |
| 1 | 42.5 | 33 | 45 | 7 | 22 | 1200 | 1200 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 22 | 1200 | 1800 | 18 |
| 1.5 | 57.5 | 30 | 45 | 5 | 31 | 1200 | 1800 | 20 |
| 2 | 57.5 | 30 | 45 | 5 | 30 | 1100 | 2200 | 22 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 1100 | 2750 | 25 |
| 3 | 57.5 | 38 | 54 | 4 | 27 | 700 | 2100 | 25 |
| 3.3 | 57.5 | 38 | 54 | 3.8 | 26 | 600 | 1980 | 28 |
| 3.5 | 57.5 | 42.5 | 56 | 3.5 | 25 | 500 | 1750 | 30 |
| 4 | 57.5 | 42.5 | 56 | 3.2 | 25 | 450 | 1800 | 32 |
| Voltage | Un 2000V.DC,Urms700Vac;Us3000V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.22 | 42.5 | 24.5 | 27.5 | 15 | 25 | 1500 | 330 | 10 |
| 0.33 | 42.5 | 33.5 | 35.5 | 12 | 24 | 1500 | 495 | 12 |
| 0.47 | 42.5 | 33.5 | 35.5 | 11 | 23 | 1400 | 658 | 15 |
| 0.68 | 42.5 | 33 | 45 | 8 | 22 | 1200 | 816 | 18 |
| 0.68 | 57.5 | 30 | 45 | 7 | 30 | 1100 | 748 | 20 |
| 0.82 | 42.5 | 33 | 45 | 7 | 28 | 1200 | 984 | 22 |
| 1 | 57.5 | 30 | 45 | 6 | 28 | 1100 | 1100 | 25 |
| 1.5 | 57.5 | 35 | 50 | 5 | 25 | 1000 | 1500 | 28 |
| 2 | 57.5 | 38 | 54 | 5 | 24 | 800 | 1600 | 28 |
| 2.2 | 57.5 | 42.5 | 56 | 4 | 23 | 700 | 1540 | 32 |
| Voltage | Un 3000V.DC,Urms750Vac;Us4500V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.15 | 42.5 | 33 | 45 | 18 | 28 | 2500 | 375 | 25 |
| 0.22 | 42.5 | 33 | 45 | 15 | 27 | 2200 | 484 | 28 |
| 0.22 | 57.5 | 35 | 50 | 15 | 25 | 2000 | 330 | 20 |
| 0.33 | 57.5 | 35 | 50 | 12 | 24 | 1800 | 495 | 20 |
| 0.47 | 57.5 | 38 | 54 | 11 | 23 | 1600 | 752 | 22 |
| 0.68 | 57.5 | 42.5 | 56 | 8 | 22 | 1500 | 1020 | 28 |
Product detail pictures:
Related Product Guide:
Sticking for the belief of "Creating items of top of the range and creating buddies with people today from all over the world", we normally put the interest of shoppers in the first place for Online Exporter Dc Power Film Capacitors - High peak current snubber film capacitors design for IGBT power electronics applications – CRE , The product will supply to all over the world, such as: Italy, Bulgaria, Jordan, We supply professional service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ‘customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
We have been appreciated the Chinese manufacturing, this time also did not let us disappoint,good job!
Send your message to us:
Write your message here and send it to us






