Rapid Delivery for Exclusive Power Capacitor Solution - High peak current snubber film capacitors design for IGBT power electronics applications – CRE
Rapid Delivery for Exclusive Power Capacitor Solution - High peak current snubber film capacitors design for IGBT power electronics applications – CRE Detail:
Technical data
| Operating temperature range | Max.Operating temperature.,Top,max: +105℃Upper category temperature: +85℃Lower category temperature: -40℃ |
| capacitance range | 0.1μF~5.6μF |
| Rated voltage | 700V.DC~3000V.DC |
| Cap.tol | ±5%(J);±10%(K) |
| Withstand voltage | 1.5Un DC/10S |
| Dissipation factor | tgδ≤0.0005 C≤1μF f=10KHztgδ≤0.001 C≥1μF f=10KHz |
| Insulation resistance |
C≤0.33μF RS≥15000 MΩ (at20℃ 100V.DC 60S) C>0.33μF RS*C≥5000S(at20℃ 100V.DC 60S) |
| Withstand strike current |
see datasheet |
| Flame retardation |
UL94V-0 |
| Life expectancy |
100000h(Un; Θhotspot≤85°C) |
| Reference standard |
IEC61071;GB/T17702; |
Specification table
| Voltage | Un 700V.DC,Urms400Vac;Us1050V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR @100KHz (mΩ) | ESL(nH) | dv/dt (V/μS) | Ipk(A) | Irms @40℃ @100KHz (A) |
| 0.47 | 42.5 | 24.5 | 27.5 | 12 | 25 | 500 | 235 | 8 |
| 0.68 | 42.5 | 24.5 | 27.5 | 10 | 25 | 480 | 326.4 | 10 |
| 1 | 42.5 | 24.5 | 27.5 | 8 | 24 | 450 | 450 | 12 |
| 1.5 | 42.5 | 33.5 | 35.5 | 7 | 25 | 430 | 645 | 5 |
| 2 | 42.5 | 33 | 35.5 | 6 | 24 | 420 | 840 | 15 |
| 2.5 | 42.5 | 33 | 45 | 6 | 23 | 400 | 1000 | 18 |
| 3 | 42.5 | 33 | 45 | 5.5 | 22 | 380 | 1140 | 20 |
| 3 | 57.5 | 30 | 45 | 5 | 26 | 350 | 1050 | 22 |
| 3.5 | 42.5 | 33 | 45 | 5 | 23 | 350 | 1225 | 25 |
| 3.5 | 57.5 | 30 | 45 | 6 | 25 | 300 | 1050 | 22 |
| 4.7 | 57.5 | 35 | 50 | 5 | 28 | 280 | 1316 | 25 |
| 5.6 | 57.5 | 38 | 54 | 4 | 30 | 250 | 1400 | 25 |
| 6 | 57.5 | 38 | 54 | 3.5 | 33 | 230 | 1380 | 28 |
| 6.8 | 57.5 | 42.5 | 56 | 3.2 | 32 | 220 | 1496 | 32 |
| 8 | 57.5 | 42.5 | 56 | 2.8 | 30 | 200 | 1600 | 33 |
| Voltage | Un 1000V.DC,Urms500Vac;Us1500V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 25 | 1000 | 470 | 10 |
| 0.68 | 42.5 | 24.5 | 27.5 | 8 | 25 | 800 | 544 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 24 | 800 | 800 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 24 | 700 | 1050 | 15 |
| 2 | 42.5 | 33 | 45 | 5 | 22 | 700 | 1400 | 20 |
| 2.5 | 57.5 | 30 | 45 | 5 | 30 | 600 | 1500 | 22 |
| 3 | 57.5 | 35 | 50 | 4 | 30 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 35 | 50 | 3.5 | 28 | 550 | 1815 | 25 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 28 | 500 | 1750 | 25 |
| 4 | 57.5 | 38 | 54 | 3.2 | 26 | 500 | 2000 | 28 |
| 4.7 | 57.5 | 42.5 | 56 | 3 | 25 | 420 | 1974 | 30 |
| 5.6 | 57.5 | 42.5 | 56 | 2.8 | 24 | 400 | 2240 | 32 |
| Voltage | Un 1200V.DC,Urms550Vac;Us1800V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 24 | 1200 | 564 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 7 | 23 | 1100 | 748 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 22 | 800 | 800 | 14 |
| 1.5 | 42.5 | 33 | 45 | 5 | 20 | 800 | 1200 | 15 |
| 2 | 57.5 | 30 | 45 | 4 | 30 | 750 | 1500 | 20 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 700 | 1750 | 25 |
| 3 | 57.5 | 35 | 50 | 4 | 27 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 38 | 54 | 4 | 27 | 550 | 1815 | 28 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 25 | 500 | 1750 | 28 |
| 4 | 57.5 | 42.5 | 56 | 3.5 | 25 | 450 | 1800 | 30 |
| 4.7 | 57.5 | 42.5 | 56 | 3.2 | 23 | 420 | 1974 | 32 |
| Voltage | Un 1700V.DC,Urms575Vac;Us2250V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.33 | 42.5 | 24.5 | 27.5 | 12 | 25 | 1300 | 429 | 9 |
| 0.47 | 42.5 | 24.5 | 27.5 | 10 | 24 | 1300 | 611 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 8 | 23 | 1300 | 884 | 12 |
| 1 | 42.5 | 33 | 45 | 7 | 22 | 1200 | 1200 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 22 | 1200 | 1800 | 18 |
| 1.5 | 57.5 | 30 | 45 | 5 | 31 | 1200 | 1800 | 20 |
| 2 | 57.5 | 30 | 45 | 5 | 30 | 1100 | 2200 | 22 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 1100 | 2750 | 25 |
| 3 | 57.5 | 38 | 54 | 4 | 27 | 700 | 2100 | 25 |
| 3.3 | 57.5 | 38 | 54 | 3.8 | 26 | 600 | 1980 | 28 |
| 3.5 | 57.5 | 42.5 | 56 | 3.5 | 25 | 500 | 1750 | 30 |
| 4 | 57.5 | 42.5 | 56 | 3.2 | 25 | 450 | 1800 | 32 |
| Voltage | Un 2000V.DC,Urms700Vac;Us3000V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.22 | 42.5 | 24.5 | 27.5 | 15 | 25 | 1500 | 330 | 10 |
| 0.33 | 42.5 | 33.5 | 35.5 | 12 | 24 | 1500 | 495 | 12 |
| 0.47 | 42.5 | 33.5 | 35.5 | 11 | 23 | 1400 | 658 | 15 |
| 0.68 | 42.5 | 33 | 45 | 8 | 22 | 1200 | 816 | 18 |
| 0.68 | 57.5 | 30 | 45 | 7 | 30 | 1100 | 748 | 20 |
| 0.82 | 42.5 | 33 | 45 | 7 | 28 | 1200 | 984 | 22 |
| 1 | 57.5 | 30 | 45 | 6 | 28 | 1100 | 1100 | 25 |
| 1.5 | 57.5 | 35 | 50 | 5 | 25 | 1000 | 1500 | 28 |
| 2 | 57.5 | 38 | 54 | 5 | 24 | 800 | 1600 | 28 |
| 2.2 | 57.5 | 42.5 | 56 | 4 | 23 | 700 | 1540 | 32 |
| Voltage | Un 3000V.DC,Urms750Vac;Us4500V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.15 | 42.5 | 33 | 45 | 18 | 28 | 2500 | 375 | 25 |
| 0.22 | 42.5 | 33 | 45 | 15 | 27 | 2200 | 484 | 28 |
| 0.22 | 57.5 | 35 | 50 | 15 | 25 | 2000 | 330 | 20 |
| 0.33 | 57.5 | 35 | 50 | 12 | 24 | 1800 | 495 | 20 |
| 0.47 | 57.5 | 38 | 54 | 11 | 23 | 1600 | 752 | 22 |
| 0.68 | 57.5 | 42.5 | 56 | 8 | 22 | 1500 | 1020 | 28 |
Product detail pictures:
Related Product Guide:
We've got quite possibly the most state-of-the-art production gear, experienced and qualified engineers and workers, acknowledged top quality handle systems along with a friendly expert gross sales group pre/after-sales support for Rapid Delivery for Exclusive Power Capacitor Solution - High peak current snubber film capacitors design for IGBT power electronics applications – CRE , The product will supply to all over the world, such as: Israel, Istanbul, Libya, The design, processing, purchasing, inspection, storage, assembling process are all in scientific and effective documentary process , increasing usage level and reliability of our brand deeply, which makes us become superior supplier of the four major product categories shell castings domestically and obtained the customer's trust well.
This supplier stick to the principle of "Quality first, Honesty as base", it is absolutely to be trust.
Send your message to us:
Write your message here and send it to us






