Super Purchasing for Dc-Link Capacitors For Dc Voltage Intermediate Circuit Of Wind Power Units - Metalized film IGBT Snubber capacitor – CRE
Super Purchasing for Dc-Link Capacitors For Dc Voltage Intermediate Circuit Of Wind Power Units - Metalized film IGBT Snubber capacitor – CRE Detail:
Technical data
| Operating temperature range | Max.Operating temperature.,Top,max: +105℃Upper category temperature: +85℃Lower category temperature: -40℃ |
| capacitance range | 0.1μF~5.6μF |
| Rated voltage | 700V.DC~3000V.DC |
| Cap.tol | ±5%(J) ;±10%(K) |
| Withstand voltage | 1.5Un DC/10S |
| Dissipation factor | tgδ≤0.0005 C≤1μF f=10KHztgδ≤0.001 C≥1μF f=10KHz |
| Insulation resistance |
C≤0.33μF RS≥15000 MΩ (at20℃ 100V.DC 60S) C>0.33μF RS*C≥5000S(at20℃ 100V.DC 60S) |
| Withstand strike current |
具体见规格表 |
| Flame retardation |
UL94V-0 |
| Life expectancy |
100000h(Un; Θhotspot≤85°C) |
| Reference standard |
IEC61071;GB/T17702; |
| Voltage | Un 700V.DC,Urms400Vac;Us1050V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR @100KHz (mΩ) | ESL(nH) | dv/dt (V/μS) | Ipk(A) | Irms @40℃ @100KHz (A) |
| 0.47 | 42.5 | 24.5 | 27.5 | 12 | 25 | 500 | 235 | 8 |
| 0.68 | 42.5 | 24.5 | 27.5 | 10 | 25 | 480 | 326.4 | 10 |
| 1 | 42.5 | 24.5 | 27.5 | 8 | 24 | 450 | 450 | 12 |
| 1.5 | 42.5 | 33.5 | 35.5 | 7 | 25 | 430 | 645 | 5 |
| 2 | 42.5 | 33 | 35.5 | 6 | 24 | 420 | 840 | 15 |
| 2.5 | 42.5 | 33 | 45 | 6 | 23 | 400 | 1000 | 18 |
| 3 | 42.5 | 33 | 45 | 5.5 | 22 | 380 | 1140 | 20 |
| 3 | 57.5 | 30 | 45 | 5 | 26 | 350 | 1050 | 22 |
| 3.5 | 42.5 | 33 | 45 | 5 | 23 | 350 | 1225 | 25 |
| 3.5 | 57.5 | 30 | 45 | 6 | 25 | 300 | 1050 | 22 |
| 4.7 | 57.5 | 35 | 50 | 5 | 28 | 280 | 1316 | 25 |
| 5.6 | 57.5 | 38 | 54 | 4 | 30 | 250 | 1400 | 25 |
| 6 | 57.5 | 38 | 54 | 3.5 | 33 | 230 | 1380 | 28 |
| 6.8 | 57.5 | 42.5 | 56 | 3.2 | 32 | 220 | 1496 | 32 |
| 8 | 57.5 | 42.5 | 56 | 2.8 | 30 | 200 | 1600 | 33 |
| Voltage | Un 1000V.DC,Urms500Vac;Us1500V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 25 | 1000 | 470 | 10 |
| 0.68 | 42.5 | 24.5 | 27.5 | 8 | 25 | 800 | 544 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 24 | 800 | 800 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 24 | 700 | 1050 | 15 |
| 2 | 42.5 | 33 | 45 | 5 | 22 | 700 | 1400 | 20 |
| 2.5 | 57.5 | 30 | 45 | 5 | 30 | 600 | 1500 | 22 |
| 3 | 57.5 | 35 | 50 | 4 | 30 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 35 | 50 | 3.5 | 28 | 550 | 1815 | 25 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 28 | 500 | 1750 | 25 |
| 4 | 57.5 | 38 | 54 | 3.2 | 26 | 500 | 2000 | 28 |
| 4.7 | 57.5 | 42.5 | 56 | 3 | 25 | 420 | 1974 | 30 |
| 5.6 | 57.5 | 42.5 | 56 | 2.8 | 24 | 400 | 2240 | 32 |
| Voltage | Un 1200V.DC,Urms550Vac;Us1800V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 24 | 1200 | 564 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 7 | 23 | 1100 | 748 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 22 | 800 | 800 | 14 |
| 1.5 | 42.5 | 33 | 45 | 5 | 20 | 800 | 1200 | 15 |
| 2 | 57.5 | 30 | 45 | 4 | 30 | 750 | 1500 | 20 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 700 | 1750 | 25 |
| 3 | 57.5 | 35 | 50 | 4 | 27 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 38 | 54 | 4 | 27 | 550 | 1815 | 28 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 25 | 500 | 1750 | 28 |
| 4 | 57.5 | 42.5 | 56 | 3.5 | 25 | 450 | 1800 | 30 |
| 4.7 | 57.5 | 42.5 | 56 | 3.2 | 23 | 420 | 1974 | 32 |
| Voltage | Un 1700V.DC,Urms575Vac;Us2250V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.33 | 42.5 | 24.5 | 27.5 | 12 | 25 | 1300 | 429 | 9 |
| 0.47 | 42.5 | 24.5 | 27.5 | 10 | 24 | 1300 | 611 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 8 | 23 | 1300 | 884 | 12 |
| 1 | 42.5 | 33 | 45 | 7 | 22 | 1200 | 1200 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 22 | 1200 | 1800 | 18 |
| 1.5 | 57.5 | 30 | 45 | 5 | 31 | 1200 | 1800 | 20 |
| 2 | 57.5 | 30 | 45 | 5 | 30 | 1100 | 2200 | 22 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 1100 | 2750 | 25 |
| 3 | 57.5 | 38 | 54 | 4 | 27 | 700 | 2100 | 25 |
| 3.3 | 57.5 | 38 | 54 | 3.8 | 26 | 600 | 1980 | 28 |
| 3.5 | 57.5 | 42.5 | 56 | 3.5 | 25 | 500 | 1750 | 30 |
| 4 | 57.5 | 42.5 | 56 | 3.2 | 25 | 450 | 1800 | 32 |
| Voltage | Un 2000V.DC,Urms700Vac;Us3000V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.22 | 42.5 | 24.5 | 27.5 | 15 | 25 | 1500 | 330 | 10 |
| 0.33 | 42.5 | 33.5 | 35.5 | 12 | 24 | 1500 | 495 | 12 |
| 0.47 | 42.5 | 33.5 | 35.5 | 11 | 23 | 1400 | 658 | 15 |
| 0.68 | 42.5 | 33 | 45 | 8 | 22 | 1200 | 816 | 18 |
| 0.68 | 57.5 | 30 | 45 | 7 | 30 | 1100 | 748 | 20 |
| 0.82 | 42.5 | 33 | 45 | 7 | 28 | 1200 | 984 | 22 |
| 1 | 57.5 | 30 | 45 | 6 | 28 | 1100 | 1100 | 25 |
| 1.5 | 57.5 | 35 | 50 | 5 | 25 | 1000 | 1500 | 28 |
| 2 | 57.5 | 38 | 54 | 5 | 24 | 800 | 1600 | 28 |
| 2.2 | 57.5 | 42.5 | 56 | 4 | 23 | 700 | 1540 | 32 |
| Voltage | Un 3000V.DC,Urms750Vac;Us4500V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.15 | 42.5 | 33 | 45 | 18 | 28 | 2500 | 375 | 25 |
| 0.22 | 42.5 | 33 | 45 | 15 | 27 | 2200 | 484 | 28 |
| 0.22 | 57.5 | 35 | 50 | 15 | 25 | 2000 | 330 | 20 |
| 0.33 | 57.5 | 35 | 50 | 12 | 24 | 1800 | 495 | 20 |
| 0.47 | 57.5 | 38 | 54 | 11 | 23 | 1600 | 752 | 22 |
| 0.68 | 57.5 | 42.5 | 56 | 8 | 22 | 1500 | 1020 | 28 |
Feature
1. Plastic, Sealed with resin;
2. Tin-plated copper inserts leads , easy installation for IGBT;
3. Resistance to high voltage, low tgδ,low temperature rise;
4. low ESL and ESR;
5. High pulse Current.
By utilizing low inductance internal constructions, optional molded resin cases, and customized terminations, SMJ-P Series are designed for fast switching IGBTS and can serve as snubbers and high current high frequency input filters.
Product detail pictures:
Related Product Guide:
"Based on domestic market and expand overseas business" is our development strategy for Super Purchasing for Dc-Link Capacitors For Dc Voltage Intermediate Circuit Of Wind Power Units - Metalized film IGBT Snubber capacitor – CRE , The product will supply to all over the world, such as: Belarus, Mozambique, Nicaragua, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
The supplier cooperation attitude is very good, encountered various problems, always willing to cooperate with us, to us as the real God.
Send your message to us:
Write your message here and send it to us





