Factory For Industrial Snubber Capacitor - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE
Factory For Industrial Snubber Capacitor - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE Detail:
SMJ-P series
Rated Voltage Range: 1000 VDC to 2000 VDC
Capacitance Range: 0.1 uf to 3.0 uf
Mounting Pitch : 22.5 mm to 48 mm
Construction : Metallized Polypropylene Dielectric Internal Series Connection
Application : IGBT Protection, Resonance Tank Circuits
The self-healing, dry-type, snubber capacitor elements are produced using specially profiled, wave cut metallized PP film which ensures low self-inductance, high rupture resistance and high reliability. Over-pressure disconnection is not considered necessary. The capacitor top is sealed with self-extinguishing eco-friendly epoxy. Special design ensures very low self inductance.

Specification table
| Voltage | Un 700V.DC,Urms400Vac;Us1050V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR @100KHz (mΩ) | ESL(nH) | dv/dt (V/μS) | Ipk(A) | Irms @40℃ @100KHz (A) |
| 0.47 | 42.5 | 24.5 | 27.5 | 12 | 25 | 500 | 235 | 8 |
| 0.68 | 42.5 | 24.5 | 27.5 | 10 | 25 | 480 | 326.4 | 10 |
| 1 | 42.5 | 24.5 | 27.5 | 8 | 24 | 450 | 450 | 12 |
| 1.5 | 42.5 | 33.5 | 35.5 | 7 | 25 | 430 | 645 | 5 |
| 2 | 42.5 | 33 | 35.5 | 6 | 24 | 420 | 840 | 15 |
| 2.5 | 42.5 | 33 | 45 | 6 | 23 | 400 | 1000 | 18 |
| 3 | 42.5 | 33 | 45 | 5.5 | 22 | 380 | 1140 | 20 |
| 3 | 57.5 | 30 | 45 | 5 | 26 | 350 | 1050 | 22 |
| 3.5 | 42.5 | 33 | 45 | 5 | 23 | 350 | 1225 | 25 |
| 3.5 | 57.5 | 30 | 45 | 6 | 25 | 300 | 1050 | 22 |
| 4.7 | 57.5 | 35 | 50 | 5 | 28 | 280 | 1316 | 25 |
| 5.6 | 57.5 | 38 | 54 | 4 | 30 | 250 | 1400 | 25 |
| 6 | 57.5 | 38 | 54 | 3.5 | 33 | 230 | 1380 | 28 |
| 6.8 | 57.5 | 42.5 | 56 | 3.2 | 32 | 220 | 1496 | 32 |
| 8 | 57.5 | 42.5 | 56 | 2.8 | 30 | 200 | 1600 | 33 |
| Voltage | Un 1000V.DC,Urms500Vac;Us1500V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 25 | 1000 | 470 | 10 |
| 0.68 | 42.5 | 24.5 | 27.5 | 8 | 25 | 800 | 544 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 24 | 800 | 800 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 24 | 700 | 1050 | 15 |
| 2 | 42.5 | 33 | 45 | 5 | 22 | 700 | 1400 | 20 |
| 2.5 | 57.5 | 30 | 45 | 5 | 30 | 600 | 1500 | 22 |
| 3 | 57.5 | 35 | 50 | 4 | 30 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 35 | 50 | 3.5 | 28 | 550 | 1815 | 25 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 28 | 500 | 1750 | 25 |
| 4 | 57.5 | 38 | 54 | 3.2 | 26 | 500 | 2000 | 28 |
| 4.7 | 57.5 | 42.5 | 56 | 3 | 25 | 420 | 1974 | 30 |
| 5.6 | 57.5 | 42.5 | 56 | 2.8 | 24 | 400 | 2240 | 32 |
| Voltage | Un 1200V.DC,Urms550Vac;Us1800V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 24 | 1200 | 564 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 7 | 23 | 1100 | 748 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 22 | 800 | 800 | 14 |
| 1.5 | 42.5 | 33 | 45 | 5 | 20 | 800 | 1200 | 15 |
| 2 | 57.5 | 30 | 45 | 4 | 30 | 750 | 1500 | 20 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 700 | 1750 | 25 |
| 3 | 57.5 | 35 | 50 | 4 | 27 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 38 | 54 | 4 | 27 | 550 | 1815 | 28 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 25 | 500 | 1750 | 28 |
| 4 | 57.5 | 42.5 | 56 | 3.5 | 25 | 450 | 1800 | 30 |
| 4.7 | 57.5 | 42.5 | 56 | 3.2 | 23 | 420 | 1974 | 32 |
| Voltage | Un 1700V.DC,Urms575Vac;Us2250V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.33 | 42.5 | 24.5 | 27.5 | 12 | 25 | 1300 | 429 | 9 |
| 0.47 | 42.5 | 24.5 | 27.5 | 10 | 24 | 1300 | 611 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 8 | 23 | 1300 | 884 | 12 |
| 1 | 42.5 | 33 | 45 | 7 | 22 | 1200 | 1200 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 22 | 1200 | 1800 | 18 |
| 1.5 | 57.5 | 30 | 45 | 5 | 31 | 1200 | 1800 | 20 |
| 2 | 57.5 | 30 | 45 | 5 | 30 | 1100 | 2200 | 22 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 1100 | 2750 | 25 |
| 3 | 57.5 | 38 | 54 | 4 | 27 | 700 | 2100 | 25 |
| 3.3 | 57.5 | 38 | 54 | 3.8 | 26 | 600 | 1980 | 28 |
| 3.5 | 57.5 | 42.5 | 56 | 3.5 | 25 | 500 | 1750 | 30 |
| 4 | 57.5 | 42.5 | 56 | 3.2 | 25 | 450 | 1800 | 32 |
| Voltage | Un 2000V.DC,Urms700Vac;Us3000V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.22 | 42.5 | 24.5 | 27.5 | 15 | 25 | 1500 | 330 | 10 |
| 0.33 | 42.5 | 33.5 | 35.5 | 12 | 24 | 1500 | 495 | 12 |
| 0.47 | 42.5 | 33.5 | 35.5 | 11 | 23 | 1400 | 658 | 15 |
| 0.68 | 42.5 | 33 | 45 | 8 | 22 | 1200 | 816 | 18 |
| 0.68 | 57.5 | 30 | 45 | 7 | 30 | 1100 | 748 | 20 |
| 0.82 | 42.5 | 33 | 45 | 7 | 28 | 1200 | 984 | 22 |
| 1 | 57.5 | 30 | 45 | 6 | 28 | 1100 | 1100 | 25 |
| 1.5 | 57.5 | 35 | 50 | 5 | 25 | 1000 | 1500 | 28 |
| 2 | 57.5 | 38 | 54 | 5 | 24 | 800 | 1600 | 28 |
| 2.2 | 57.5 | 42.5 | 56 | 4 | 23 | 700 | 1540 | 32 |
| Voltage | Un 3000V.DC,Urms750Vac;Us4500V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.15 | 42.5 | 33 | 45 | 18 | 28 | 2500 | 375 | 25 |
| 0.22 | 42.5 | 33 | 45 | 15 | 27 | 2200 | 484 | 28 |
| 0.22 | 57.5 | 35 | 50 | 15 | 25 | 2000 | 330 | 20 |
| 0.33 | 57.5 | 35 | 50 | 12 | 24 | 1800 | 495 | 20 |
| 0.47 | 57.5 | 38 | 54 | 11 | 23 | 1600 | 752 | 22 |
| 0.68 | 57.5 | 42.5 | 56 | 8 | 22 | 1500 | 1020 | 28 |
Product detail pictures:
Related Product Guide:
Being supported by an innovative and experienced IT team, we could present technical support on pre-sales & after-sales service for Factory For Industrial Snubber Capacitor - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE , The product will supply to all over the world, such as: Uzbekistan, Tunisia, Thailand, Our products have mainly exported to south-east Asia Euro-America, and sales to all of our country. And depending on excellent quality, reasonable price, best service, we've got got good feedback from customers overseas. You are welcomed to join us for more possibilities and benefits. We welcome customers, business associations and friends from all parts of the world to contact us and seek cooperation for mutual benefits.
The factory can meet continuously developing economic and market needs, so that their products are widely recognized and trusted, and that's why we chose this company.
Send your message to us:
Write your message here and send it to us






