Fast delivery Ac Film Capacitor Bank - AC Filter Capacitor (AKMJ-MC) – CRE
Fast delivery Ac Film Capacitor Bank - AC Filter Capacitor (AKMJ-MC) – CRE Detail:
Technical data
| Operating temperature range | Max.Operating temperature: +85℃ Upper category temperature:+70℃ Lower category temperature:-40℃ | ||
| capacitance range | Single-phase | 20UF~500μF | |
| three-phase |
3×40UF~3×200μF |
||
| Rated voltage |
330V.AC/50Hz~1140V.AC/50Hz |
||
| Cap.tol |
±5%(J) ; |
||
| Withstand voltage |
Vt-t |
2.15Un /10S |
|
|
Vt-c |
1000+2×Un V.AC 60S(min3000V.AC) |
||
| Over Voltage |
1.1Un(30% of on-load-during.) |
||
|
1.15Un(30min/day) |
|||
|
1.2Un(5min/day) |
|||
|
1.3Un(1min/day) |
|||
|
1.5Un(100ms every time,1000times during the lifetime) |
|||
| Dissipation factor |
tgδ≤0.002 f=100Hz |
||
| tgδ0≤0.0002 | |||
| Insulation resistance | RS*C≥10000S(at20℃ 100V.DC) | ||
| Flame retardation |
UL94V-0 |
||
| Maximum aititude |
2000m |
||
| When the altitude is above 2000m to below 5000m, it is necessary to consider the use of reduced amount. (for each increase of 1000m, the voltage and current will be reduced by 10%)
|
|||
| Life expectancy |
100000h(Un; Θhotspot≤55 °C) |
||
| Reference standard |
IEC61071;IEC 60831; |
||
Feature
1. Aluminum round housing package, Sealed with resin;
2. Copper nut/screw leads, insulated plastic cover positioning;
3. Large capacity, customized dimension;
4. Resistance to high voltage, with self-healing;
5. High ripple current, high dv / dt withstand capability.
Application
1. Widely used in power electronic equipment used for AC filtering.
2. In the high-power UPS, switching power supply, inverter and other equipment for the AC filter, harmonics and improve power factor control.
Typical circuit

Life expectancy

Outline drawing of single phase
|
ΦD(mm) |
P(mm) |
H1(mm) |
S |
F |
M |
|
76 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
86 |
32 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
96 |
45 |
20 |
M12×16 |
M6×10 |
M8×20 |
|
116 |
50 |
22 |
M12×16 |
M6×10 |
M8×20 |
|
136 |
50 |
30 |
M16×25 |
M6×10 |
M8×20 |


Outline drawing of three- phase
|
ΦD(mm) |
H1(mm) |
S |
F |
M |
D1 |
P |
|
116 |
40 |
M12×16 |
M6×10 |
M8×20 |
50 |
43.5 |
|
136 |
30 |
M16×25 |
M6×10 |
M8×20 |
60 |
52 |

| Voltage | Un=330V.AC Us=1200V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 80 | 76 | 80 | 40 | 80 | 6.4 | 19.2 | 30 | 4 | 4.2 | 32 | 0.5 |
| 120 | 86 | 80 | 40 | 70 | 8.4 | 25.2 | 40 | 2.8 | 3.3 | 32 | 0.7 |
| 150 | 96 | 80 | 45 | 70 | 10.5 | 31.5 | 50 | 3.5 | 1.7 | 45 | 0.75 |
| 170 | 76 | 130 | 50 | 60 | 10.2 | 30.6 | 60 | 3.2 | 1.3 | 32 | 0.75 |
| 230 | 86 | 130 | 50 | 60 | 13.8 | 41.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
| 300 | 96 | 130 | 50 | 50 | 15.0 | 45.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
| 420 | 116 | 130 | 60 | 50 | 21.0 | 63.0 | 80 | 1.9 | 1.2 | 50 | 1.6 |
| Voltage | Un=450V.AC Us=1520V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 50 | 76 | 80 | 40 | 90 | 4.5 | 13.5 | 30 | 4 | 4.2 | 32 | 0.5 |
| 65 | 86 | 80 | 50 | 80 | 5.2 | 15.6 | 40 | 2.8 | 3.3 | 32 | 0.7 |
| 80 | 96 | 80 | 45 | 80 | 6.4 | 19.2 | 50 | 3.5 | 1.7 | 45 | 0.75 |
| 100 | 76 | 130 | 50 | 70 | 7.0 | 21.0 | 60 | 3.2 | 1.3 | 32 | 0.75 |
| 130 | 86 | 130 | 45 | 60 | 7.8 | 23.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
| 160 | 96 | 130 | 50 | 50 | 8.0 | 24.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
| 250 | 116 | 130 | 60 | 50 | 12.5 | 37.5 | 80 | 1.9 | 1.2 | 50 | 1.6 |
| Voltage | Un=690V.AC Us=2100V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 40 | 76 | 130 | 50 | 100 | 4.0 | 12.0 | 30 | 2.8 | 6.0 | 32 | 0.75 |
| 50 | 76 | 150 | 45 | 90 | 4.5 | 13.5 | 35 | 2.4 | 5.1 | 32 | 0.85 |
| 60 | 86 | 130 | 45 | 80 | 4.8 | 14.4 | 40 | 2.2 | 4.3 | 32 | 1.1 |
| 65 | 86 | 150 | 50 | 80 | 5.2 | 15.6 | 45 | 1.8 | 4.1 | 32 | 1.2 |
| 75 | 96 | 130 | 50 | 80 | 6.0 | 18.0 | 50 | 1.5 | 4.0 | 45 | 1.2 |
| 80 | 96 | 150 | 55 | 75 | 6.0 | 18.0 | 60 | 1.2 | 3.5 | 45 | 1.3 |
| 110 | 116 | 130 | 60 | 70 | 7.7 | 23.1 | 65 | 0.8 | 4.4 | 50 | 1.6 |
| 120 | 116 | 150 | 65 | 50 | 6.0 | 18.0 | 75 | 0.6 | 4.4 | 50 | 1.8 |
| Voltage | Un=850V.AC Us=2850V | ||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) |
| 25 | 76 | 130 | 50 | 110 | 2.8 | 8.3 | 35 | 1.5 | 8.2 | 32 | 0.75 |
| 30 | 76 | 150 | 60 | 100 | 3.0 | 9.0 | 40 | 1.2 | 7.8 | 32 | 0.85 |
| 32 | 86 | 130 | 45 | 100 | 3.2 | 9.6 | 50 | 1.15 | 5.2 | 32 | 1.1 |
| 45 | 86 | 150 | 50 | 90 | 4.1 | 12.2 | 50 | 1.05 | 5.7 | 32 | 1.2 |
| 40 | 96 | 130 | 50 | 90 | 3.6 | 10.8 | 50 | 1 | 6.0 | 45 | 1.2 |
| 60 | 96 | 150 | 60 | 85 | 5.1 | 15.3 | 60 | 0.9 | 4.6 | 45 | 1.3 |
| 60 | 116 | 130 | 60 | 80 | 4.8 | 14.4 | 65 | 0.85 | 4.2 | 50 | 1.6 |
| 90 | 116 | 150 | 65 | 75 | 6.8 | 20.3 | 75 | 0.8 | 3.3 | 50 | 1.8 |
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A) | ESR(mΩ) | Rth(K/W) | P(mm) | weight(Kg) | |
| Voltage | Un=400V.AC Us=1200V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 110 | 116 | 130 | 100 | 60 | 6.6 | 19.8 | 3×50 | 3×0.78 | 4.5 | 43.5 | 1.6 |
| 3× | 145 | 116 | 180 | 110 | 50 | 7.3 | 21.8 | 3×60 | 3×0.72 | 3.8 | 43.5 | 2.4 |
| 3× | 175 | 116 | 210 | 120 | 50 | 8.8 | 26.3 | 3×75 | 3×0.67 | 3.5 | 43.5 | 2.7 |
| 3× | 200 | 136 | 230 | 125 | 40 | 8.0 | 24.0 | 3×85 | 3×0.6 | 2.1 | 52 | 4.2 |
| Voltage | Un=500V.AC Us=1520V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 100 | 116 | 180 | 100 | 80 | 8.0 | 24.0 | 3×45 | 3×0.78 | 4.5 | 43.5 | 2.6 |
| 3× | 120 | 116 | 230 | 120 | 70 | 8.4 | 25.2 | 3×50 | 3×0.72 | 3.8 | 43.5 | 3 |
| 3× | 125 | 136 | 180 | 110 | 40 | 5.0 | 15.0 | 3×70 | 3×0.67 | 3.5 | 52 | 3.2 |
| 3× | 135 | 136 | 230 | 130 | 50 | 6.8 | 20.3 | 3×80 | 3×0.6 | 2.1 | 52 | 4.2 |
| Voltage | Un=690V.AC Us=2100V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 49 | 116 | 230 | 120 | 70 | 3.4 | 10.3 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
| 3× | 55.7 | 136 | 230 | 130 | 90 | 5.0 | 15.0 | 3×56 | 3×0.4 | 2.1 | 52 | 4.2 |
| Voltage | Un=850V.AC Us=2580V | |||||||||||
| Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | Ip(KA) | Is(KA) | Irms(A)50℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | weight(Kg) | |
| 3× | 41.5 | 116 | 230 | 120 | 80 | 3.0 | 9.0 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
| 3× | 55.7 | 136 | 230 | 130 | 50 | 0.4 | 1.2 | 3×104 | 3×0.45 | 1.8 | 52 | 4.2 |
Product detail pictures:
Related Product Guide:
In the past few years, our business absorbed and digested advanced technologies both equally at home and abroad. In the meantime, our company staffs a group of experts devoted to your advancement of Fast delivery Ac Film Capacitor Bank - AC Filter Capacitor (AKMJ-MC) – CRE , The product will supply to all over the world, such as: Lithuania, Cannes, Yemen, We follow superior mechanism to process these products that ensure optimum durability and reliability of the products. We follow latest effective washing and straightening processes that allow us to offer unmatched quality of products for our clients. We continually strive for perfection and all our efforts are directed towards attaining complete client satisfaction.
It can be said that this is a best producer we encountered in China in this industry, we feel lucky to work with so excellent manufacturer.





