One of Hottest for Capacitor For Wind Power Generator - Custom-made film capacitor for defibrillators – CRE
One of Hottest for Capacitor For Wind Power Generator - Custom-made film capacitor for defibrillators – CRE Detail:
DKMJ-S Specification
CRE has been a world leader in high-performance film capacitor technology design for 10 years. We produce dry-wound capacitors, from 100VDC to 4kVDC. A key feature of CRE High Power is Controlled Self-Healing technology. This enables the capacitors to continue to function without catastrophic failure by effectively insulating any microscopic conduction sites within the dielectric.
While power film capacitors remain functional throughout their operating life, the initial capacitance value will decrease at a rate dependent upon the applied voltage and hot spot temperature. Our standard designs provide < (2-5)% capacitance loss over 100,000 hours lifetime at nominal voltage and a 70ºC hot spot temperature, while application specific designs can be provided on request. Various series of CRE High Power Capacitors are available for DC filtering, Protection, Pulse Discharge, Tuning, AC filtering and Storage applications.
Technical data
Rated capacitance |
CN |
1880μF±10% |
Rated voltage |
UN |
2150V.DC |
Non-recurrent surge voltage |
Us |
3225V |
Maximum current |
Imax |
240A |
Maximum peak current |
Î |
28.2KA |
Maximum surge current |
Is |
84.6KA |
Series resistance |
Rs |
≤0.35mΩ |
Tangent of the loss |
tanδ |
0.002 (100Hz) |
Tangent of the loss angle |
tanδ0 |
0.0002 |
Self dischargetime const. |
C × Ris |
10000S(100VDC 60S) |
Self inductance |
Le |
≤29nH |
Thermal resistance |
Rth |
0.33K/W |
Lowest operating temperature |
Èmin |
-40°C |
Maximum operating temperature |
Èmax |
85C |
Storage temperature |
Èstorage |
-40~85°C |
Service life |
at Èhotspot |
100000 h(≤70 °C) |
Failure quota |
100Fit |
|
Test data | ||
Voltage test between terminals |
Vtt |
3225V.DC/10S |
A.C. voltage test terminal/container |
Vt-c |
7000V.AC/50Hz 10S |
Operating altitude |
2000m(max) |
|
Maximal torque |
25Nm(max) |
|
Weight |
≈25kg |
DKMJ-S Selection table
Voltage | Un 800V.DC Us 1200V Ur 200V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
4000 | 340 | 125 | 190 | 5 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
8000 | 340 | 125 | 350 | 4 | 32.0 | 180 | 0.72 | 0.6 | 31.2 |
6000 | 420 | 125 | 245 | 5 | 30.0 | 150 | 0.95 | 0.7 | 26.4 |
10000 | 420 | 125 | 360 | 4 | 40.0 | 200 | 0.72 | 0.5 | 39.2 |
12000 | 420 | 235 | 245 | 4 | 48.0 | 250 | 0.9 | 0.3 | 49.6 |
20000 | 420 | 235 | 360 | 3 | 60.0 | 300 | 0.6 | 0.3 | 73.6 |
Voltage | Un 1200V.DC Us 1800V Ur 300V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2500 | 340 | 125 | 190 | 8 | 20.0 | 120 | 1.1 | 0.9 | 17.6 |
3300 | 340 | 125 | 245 | 8 | 26.4 | 150 | 0.95 | 0.7 | 22.4 |
5000 | 420 | 125 | 300 | 7 | 35.0 | 180 | 0.8 | 0.6 | 32.8 |
7500 | 420 | 125 | 430 | 5.5 | 41.3 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 190 | 8 | 40.0 | 200 | 1.1 | 0.3 | 32.8 |
10000 | 340 | 235 | 350 | 6 | 60.0 | 250 | 0.8 | 0.3 | 58.4 |
5000 | 420 | 235 | 175 | 8 | 40.0 | 200 | 1 | 0.4 | 36 |
7500 | 420 | 235 | 245 | 7 | 52.5 | 250 | 0.9 | 0.3 | 49.6 |
10000 | 420 | 235 | 300 | 7 | 70.0 | 250 | 0.8 | 0.3 | 61.6 |
15000 | 420 | 235 | 430 | 5 | 75.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 1500V.DC Us 2250V Ur 450V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1200 | 340 | 125 | 190 | 10 | 12.0 | 120 | 1.1 | 0.9 | 17.6 |
3000 | 340 | 125 | 420 | 8 | 24.0 | 180 | 0.66 | 0.7 | 37.6 |
2000 | 420 | 125 | 245 | 10 | 20.0 | 150 | 0.95 | 0.7 | 26.4 |
4000 | 420 | 125 | 430 | 8 | 32.0 | 200 | 0.66 | 0.6 | 44.8 |
5000 | 340 | 235 | 350 | 8 | 40.0 | 250 | 0.8 | 0.3 | 58.4 |
4000 | 420 | 235 | 245 | 10 | 40.0 | 250 | 0.9 | 0.3 | 49.6 |
8000 | 420 | 235 | 430 | 8 | 64.0 | 300 | 0.6 | 0.3 | 84 |
Voltage | Un 2000V.DC Us 3000V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
1000 | 340 | 125 | 245 | 12 | 12.0 | 150 | 0.95 | 0.7 | 22.4 |
1500 | 340 | 125 | 350 | 10 | 15.0 | 180 | 0.72 | 0.6 | 31.2 |
2000 | 420 | 125 | 360 | 10 | 20.0 | 200 | 0.72 | 0.5 | 39.2 |
2400 | 420 | 125 | 430 | 9 | 21.6 | 200 | 0.66 | 0.6 | 44.8 |
3200 | 340 | 235 | 350 | 10 | 32.0 | 250 | 0.8 | 0.3 | 46.4 |
4000 | 420 | 235 | 360 | 10 | 40.0 | 280 | 0.7 | 0.3 | 58.4 |
4800 | 420 | 235 | 430 | 9 | 43.2 | 300 | 0.6 | 0.3 | 67.2 |
Voltage | Un 2200V.DC Us 3300V Ur 600V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
2000 | 420 | 235 | 245 | 12 | 24 | 150 | 0.9 | 0.740740741 | 40 |
2750 | 420 | 235 | 300 | 10 | 27.5 | 200 | 0.8 | 0.46875 | 49.6 |
3500 | 420 | 235 | 360 | 10 | 35 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 3000V.DC Us 4500V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
1050 | 420 | 235 | 245 | 20 | 21 | 150 | 0.9 | 0.740740741 | 40 |
1400 | 420 | 235 | 300 | 15 | 21 | 200 | 0.8 | 0.46875 | 49.6 |
1800 | 420 | 235 | 360 | 15 | 27 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 4000V.DC Us 6000V Ur 1000V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms (A)max | ESR (mΩ) | Rth (K/W) | Weight (Kg) |
600 | 420 | 235 | 245 | 20 | 12 | 150 | 0.9 | 0.740740741 | 40 |
800 | 420 | 235 | 300 | 20 | 16 | 200 | 0.8 | 0.46875 | 49.6 |
1000 | 420 | 235 | 360 | 20 | 20 | 200 | 0.7 | 0.535714286 | 58.4 |
Voltage | Un 2800V.DC Us 4200V Ur 800V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1000 | 560 | 190 | 310 | 20 | 2×20 | 2×350 | 1 | 0.2 | 60 |
Voltage | Un 3200V.DC Us 4800V Ur 900V | ||||||||
Cn (μF) | W (mm) | T (mm) | H (mm) | dv/dt (V/μS) | Ip (KA) | Irms(A)50℃@10KHz | ESR (mΩ) @1KHz | Rth (K/W) | Weight (Kg) |
2×1200 | 340 | 175 | 950 | 15 | 2×18 | 2×200 | 1.0 | 0.5 | 95 |
Product detail pictures:
Related Product Guide:
Our advantages are lower prices,dynamic sales team,specialized QC,strong factories,high quality products and services for One of Hottest for Capacitor For Wind Power Generator - Custom-made film capacitor for defibrillators – CRE , The product will supply to all over the world, such as: Nepal, Mecca, Dominica, "Good quality, Good service " is always our tenet and credo. We take every effort to control the quality, package, labels etc and our QC will check every detail during producing and before shipment. We have been willing to establish long business relationship with all those who seek the high quality products and good service. We've got set up a wide sales network across European countries, North of America, South of America, Middle East, Africa, East Asia countries.Please contact us now, you will find our expert experience and high quality grades will contribute to your business.
By Kristin from Mumbai - 2018.09.12 17:18
We feel easy to cooperate with this company, the supplier is very responsible, thanks.There will be more in-depth cooperation.
By Eric from Luxemburg - 2017.08.18 18:38