One of Hottest for Capacitor For Wind Power Generator - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE
One of Hottest for Capacitor For Wind Power Generator - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE Detail:
SMJ-P series
Rated Voltage Range: 1000 VDC to 2000 VDC
Capacitance Range: 0.1 uf to 3.0 uf
Mounting Pitch : 22.5 mm to 48 mm
Construction : Metallized Polypropylene Dielectric Internal Series Connection
Application : IGBT Protection, Resonance Tank Circuits
The self-healing, dry-type, snubber capacitor elements are produced using specially profiled, wave cut metallized PP film which ensures low self-inductance, high rupture resistance and high reliability. Over-pressure disconnection is not considered necessary. The capacitor top is sealed with self-extinguishing eco-friendly epoxy. Special design ensures very low self inductance.

Specification table
| Voltage | Un 700V.DC,Urms400Vac;Us1050V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR @100KHz (mΩ) | ESL(nH) | dv/dt (V/μS) | Ipk(A) | Irms @40℃ @100KHz (A) |
| 0.47 | 42.5 | 24.5 | 27.5 | 12 | 25 | 500 | 235 | 8 |
| 0.68 | 42.5 | 24.5 | 27.5 | 10 | 25 | 480 | 326.4 | 10 |
| 1 | 42.5 | 24.5 | 27.5 | 8 | 24 | 450 | 450 | 12 |
| 1.5 | 42.5 | 33.5 | 35.5 | 7 | 25 | 430 | 645 | 5 |
| 2 | 42.5 | 33 | 35.5 | 6 | 24 | 420 | 840 | 15 |
| 2.5 | 42.5 | 33 | 45 | 6 | 23 | 400 | 1000 | 18 |
| 3 | 42.5 | 33 | 45 | 5.5 | 22 | 380 | 1140 | 20 |
| 3 | 57.5 | 30 | 45 | 5 | 26 | 350 | 1050 | 22 |
| 3.5 | 42.5 | 33 | 45 | 5 | 23 | 350 | 1225 | 25 |
| 3.5 | 57.5 | 30 | 45 | 6 | 25 | 300 | 1050 | 22 |
| 4.7 | 57.5 | 35 | 50 | 5 | 28 | 280 | 1316 | 25 |
| 5.6 | 57.5 | 38 | 54 | 4 | 30 | 250 | 1400 | 25 |
| 6 | 57.5 | 38 | 54 | 3.5 | 33 | 230 | 1380 | 28 |
| 6.8 | 57.5 | 42.5 | 56 | 3.2 | 32 | 220 | 1496 | 32 |
| 8 | 57.5 | 42.5 | 56 | 2.8 | 30 | 200 | 1600 | 33 |
| Voltage | Un 1000V.DC,Urms500Vac;Us1500V | |||||||
| Diemension(mm) | ||||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 25 | 1000 | 470 | 10 |
| 0.68 | 42.5 | 24.5 | 27.5 | 8 | 25 | 800 | 544 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 24 | 800 | 800 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 24 | 700 | 1050 | 15 |
| 2 | 42.5 | 33 | 45 | 5 | 22 | 700 | 1400 | 20 |
| 2.5 | 57.5 | 30 | 45 | 5 | 30 | 600 | 1500 | 22 |
| 3 | 57.5 | 35 | 50 | 4 | 30 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 35 | 50 | 3.5 | 28 | 550 | 1815 | 25 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 28 | 500 | 1750 | 25 |
| 4 | 57.5 | 38 | 54 | 3.2 | 26 | 500 | 2000 | 28 |
| 4.7 | 57.5 | 42.5 | 56 | 3 | 25 | 420 | 1974 | 30 |
| 5.6 | 57.5 | 42.5 | 56 | 2.8 | 24 | 400 | 2240 | 32 |
| Voltage | Un 1200V.DC,Urms550Vac;Us1800V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.47 | 42.5 | 24.5 | 27.5 | 11 | 24 | 1200 | 564 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 7 | 23 | 1100 | 748 | 12 |
| 1 | 42.5 | 33.5 | 35.5 | 6 | 22 | 800 | 800 | 14 |
| 1.5 | 42.5 | 33 | 45 | 5 | 20 | 800 | 1200 | 15 |
| 2 | 57.5 | 30 | 45 | 4 | 30 | 750 | 1500 | 20 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 700 | 1750 | 25 |
| 3 | 57.5 | 35 | 50 | 4 | 27 | 600 | 1800 | 25 |
| 3.3 | 57.5 | 38 | 54 | 4 | 27 | 550 | 1815 | 28 |
| 3.5 | 57.5 | 38 | 54 | 3.5 | 25 | 500 | 1750 | 28 |
| 4 | 57.5 | 42.5 | 56 | 3.5 | 25 | 450 | 1800 | 30 |
| 4.7 | 57.5 | 42.5 | 56 | 3.2 | 23 | 420 | 1974 | 32 |
| Voltage | Un 1700V.DC,Urms575Vac;Us2250V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.33 | 42.5 | 24.5 | 27.5 | 12 | 25 | 1300 | 429 | 9 |
| 0.47 | 42.5 | 24.5 | 27.5 | 10 | 24 | 1300 | 611 | 10 |
| 0.68 | 42.5 | 33.5 | 35.5 | 8 | 23 | 1300 | 884 | 12 |
| 1 | 42.5 | 33 | 45 | 7 | 22 | 1200 | 1200 | 15 |
| 1.5 | 42.5 | 33 | 45 | 6 | 22 | 1200 | 1800 | 18 |
| 1.5 | 57.5 | 30 | 45 | 5 | 31 | 1200 | 1800 | 20 |
| 2 | 57.5 | 30 | 45 | 5 | 30 | 1100 | 2200 | 22 |
| 2.5 | 57.5 | 35 | 50 | 4 | 28 | 1100 | 2750 | 25 |
| 3 | 57.5 | 38 | 54 | 4 | 27 | 700 | 2100 | 25 |
| 3.3 | 57.5 | 38 | 54 | 3.8 | 26 | 600 | 1980 | 28 |
| 3.5 | 57.5 | 42.5 | 56 | 3.5 | 25 | 500 | 1750 | 30 |
| 4 | 57.5 | 42.5 | 56 | 3.2 | 25 | 450 | 1800 | 32 |
| Voltage | Un 2000V.DC,Urms700Vac;Us3000V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.22 | 42.5 | 24.5 | 27.5 | 15 | 25 | 1500 | 330 | 10 |
| 0.33 | 42.5 | 33.5 | 35.5 | 12 | 24 | 1500 | 495 | 12 |
| 0.47 | 42.5 | 33.5 | 35.5 | 11 | 23 | 1400 | 658 | 15 |
| 0.68 | 42.5 | 33 | 45 | 8 | 22 | 1200 | 816 | 18 |
| 0.68 | 57.5 | 30 | 45 | 7 | 30 | 1100 | 748 | 20 |
| 0.82 | 42.5 | 33 | 45 | 7 | 28 | 1200 | 984 | 22 |
| 1 | 57.5 | 30 | 45 | 6 | 28 | 1100 | 1100 | 25 |
| 1.5 | 57.5 | 35 | 50 | 5 | 25 | 1000 | 1500 | 28 |
| 2 | 57.5 | 38 | 54 | 5 | 24 | 800 | 1600 | 28 |
| 2.2 | 57.5 | 42.5 | 56 | 4 | 23 | 700 | 1540 | 32 |
| Voltage | Un 3000V.DC,Urms750Vac;Us4500V | |||||||
| Cn(μF) | L(±1) | T(±1) | H(±1) | ESR(mΩ) | ESL(nH) | dv/dt(V/μS) | Ipk(A) | Irms |
| 0.15 | 42.5 | 33 | 45 | 18 | 28 | 2500 | 375 | 25 |
| 0.22 | 42.5 | 33 | 45 | 15 | 27 | 2200 | 484 | 28 |
| 0.22 | 57.5 | 35 | 50 | 15 | 25 | 2000 | 330 | 20 |
| 0.33 | 57.5 | 35 | 50 | 12 | 24 | 1800 | 495 | 20 |
| 0.47 | 57.5 | 38 | 54 | 11 | 23 | 1600 | 752 | 22 |
| 0.68 | 57.5 | 42.5 | 56 | 8 | 22 | 1500 | 1020 | 28 |
Product detail pictures:
Related Product Guide:
Our products are widely recognized and trusted by users and can meet continuously developing economic and social needs for One of Hottest for Capacitor For Wind Power Generator - Low loss dielectric of polypropylene film Snubber capacitor for IGBT application – CRE , The product will supply to all over the world, such as: Saudi Arabia, Surabaya, Seattle, Customer satisfaction is our goal. We are looking forward to cooperating with you and providing our best services to suit your needs. We warmly welcome you to contact us and make sure you feel free to contact us. Browse our online showroom to see what we can do for you. And then E-mail us your specs or inquiries today.
The supplier abide the theory of "quality the basic, trust the first and management the advanced" so that they can ensure a reliable product quality and stable customers.
Send your message to us:
Write your message here and send it to us





